Car Dent Puller Machine

Unlike basic consumer DIY suction cups or glue pullers, industrial dent pullers use rapid electrical resistance welding to pull metal from the outside.Stripping: The technician grinds a small patch of paint off the dented area to expose the bare, raw metal.Welding: Using the machine's welding gun, a small metal accessory (such as a washer, star washer, corrugated wire, or stud pin) is momentarily spot-welded directly into the center of the dent. The machine delivers a high-current, short-duration pulse so it only bonds to the surface without burning holes through the panel.Pulling: A Slide Hammer or mechanical pulling lever is hooked onto the welded accessory. The technician uses controlled mechanical force to gently pull the dent outward until the metal panel is re-aligned to its original factory shape.Finishing: The accessory is twisted off or cut away, the remaining spot is ground smooth, and the area is ready for minimal body filler and fresh paint.Key Features & Product Specifications to HighlightWhen listing this machine on your store, these are the technical selling points customers look for:Operation Modes (Manual vs. Automatic/Smart): Modern machines have intelligent microprocessors. “Smart” mode automatically triggers the spot weld the millisecond the welding tip touches the metal panel, speeding up workflow.Output Current (Amps): Industrial units usually range between 2000A to 3500A. Higher amperage ensures a quick, strong temporary bond on modern high-strength steels.Versatile Pulling Attachments: High-quality setups come with multi-hook claws, star washers (for rapid sliding pulls), and wavy wire setups (for long creased dents).Key Benefits for Auto WorkshopsMassive Time Savings: Technicians do not need to strip out internal door upholstery, airbags, or headliners to push a dent from the inside out.Preserves Structural Integrity: It works externally, preventing unnecessary structural disassembly or panel replacements.Lower Filler Usage: Because the machine pulls the metal back incredibly close to its original form, the shop uses significantly less body filler (putty), resulting in a much higher quality, longer-lasting repair.

Brand :NEUTECH

Dent Puller Type :Manual

Voltage :230 V

Power Source :2200 W

Phase :Single Phase

Noise Level :60 db

Color :Red

Model Name/Number :NT DENT